Project Liability Insurance
Published: November 7, 2026 · Last reviewed: November 7, 2026 · Est. reading time 6 minutes
What this button does
Get the right coverage answer the first time you search. Add Total CSR as a preferred source, and our expert-written coverage resources will show up higher in your search results.
In plain language: Project liability insurance is professional liability coverage bought for one building project. It protects the architects, engineers, and other designers on that job if a design mistake causes a loss, and its limits apply only to that project.
Technical definition: Project liability insurance is a form of architects and engineers (A&E) liability coverage that applies only to work on a single named project rather than an insured's entire practice. One policy typically covers every member of the project's design team, with limits dedicated to that project.
Project Liability Insurance at a Glance
| Attribute | Detail |
|---|---|
| Also known as | Project-specific professional liability, project-specific A&E policy |
| Category | Professional liability |
| Lines of business | Professional liability, A&E coverage |
| Industries most affected | Construction, architecture, engineering, real estate development |
| Who is insured | Architects, engineers and consultants on one project team |
| Who usually buys it | Owner or lead design firm |
| Common alternative | Practice insurance policy |
| Also interacts with | Wrap-up programs, contractors' professional liability, claims-made reporting |
Key Takeaways
- Project liability insurance is professional liability coverage for the design team on one construction project.
- Large construction projects often require high design limits that individual firms' practice policies cannot supply, so agents see it in owner contracts.
- Project liability insurance is not project-specific general liability; it covers design errors, not worker injuries or faulty workmanship.
- Agencies should confirm which design firms are named, how long coverage lasts after completion, and how the limits match the construction contracts.
What Is Project Liability Insurance in Insurance?
Project liability insurance is a project-specific insurance policy that covers professional malpractice by the designers of one project. A firm's annual policy, called a practice insurance policy, covers all of its work and shares one aggregate limit across every job. A project policy sets that limit aside for a single project.
According to IRMI, these policies cover all members of a project's design team, reduce disputes when a claim arises, keep coverage in place after the work ends, and make high limits available on large projects. Design firms benefit because one claim on a big job does not drain the policy limits on their practice policy. Project owners benefit because one carrier answers for the whole design team, so finger-pointing among firms is less likely to stall a settlement.
For example, an owner building a $200 million hospital asks for $25 million of design coverage. The architect carries $5 million on its practice policy. A project policy naming the architect and its engineering consultants closes that gap for this job only.
How Does Project Liability Insurance Work?
- The contract requirement. Construction contracts or the owner's insurance requirements call for project-specific design coverage with stated limits.
- The placement. An agent submits the project and design team to an insurance carrier, and the owner or lead firm pays the insurance premiums.
- The covered period. Coverage usually runs through design and construction, often with a set reporting period after completion and a per-project aggregate.
- The claim. A design error leads to a demand, and the policy pays legal defense costs, legal fees, and damages up to the project limit. Insurance claims from other jobs never touch that limit.
Claim Examples Involving Project Liability Insurance
Parking garage design error under project-specific insurance
An engineer undersized beams in a garage design, and cracking appeared before opening. The owner sued the architect and the structural engineer. The project policy covered both firms, so one carrier handled the defense and the claim settled without the firms blaming each other.
Mechanical design flaw found after completion
A hospital's ventilation system failed to meet code two years after occupancy. The claim was made within the project policy's reporting period, which extended past completion. The design firm's practice policy limits stayed untouched for its other clients.
Jobsite injury handled under CGL coverage
A subcontractor's employee fell from scaffolding on a project insured under a design-team project policy. The fall was a general liability and workers' compensation matter, not a design claim. Workers' compensation paid the medical expenses, and the general contractor's commercial general liability policy and umbrella liability answered the injury lawsuit.
Project Liability Insurance vs. Project Specific General Liability: What Is the Difference?
Project liability insurance covers design professionals for errors in their plans and specifications, a common need in the construction industry. Project-specific general liability, often written inside a wrap-up insurance or controlled insurance program such as an OCIP or CCIP, covers bodily injury and property damage claims from construction work. IRMI notes that professional liability is only sometimes included in a wrap-up.
| Comparison area | Project Liability Insurance | Project Specific General Liability |
|---|---|---|
| Primary use case | Design errors and omissions | Jobsite bodily injury and property damage |
| Coverage/concept type | Professional liability | CGL coverage |
| Who is insured | Architects, engineers, design consultants | Owner, general contractor, subcontractors |
| Typical exclusions | Faulty construction work | Professional services |
| Limits | Per claim and per project | Per occurrence limit and aggregate |
| Ongoing and completed operations | Not covered | Bodily injury and property damage coverage |
| Common mistakes | Assuming the CGL covers design claims | Assuming the wrap-up covers design claims |
What Are the Most Common Mistakes With Project Liability Insurance?
- Treating it as general liability. An agent who sells project liability insurance as jobsite liability protection leaves the client without bodily injury coverage and creates E&O exposure.
- Missing design firms. A consultant left off the named design team has no coverage under the policy, so a claim falls back on that firm's own practice policy.
- Ignoring the reporting period. Construction defects often surface years later, and a claim made after the reporting period ends is not covered.
- Mismatched limits. A certificate of insurance showing lower limits than the contract requires puts the client in breach and adds risk management problems.
- Assuming the wrap-up includes it. Many wrap-ups carry only general liability and workers' compensation, so the design team may have little or no coverage on the project.
- Copying general liability contract terms. Requests for an additional insured endorsement, waiver of subrogation, or primary and noncontributory wording are built into liability policies, so check with the carrier before promising them on a design policy.
Sources and References
- IRMI. Project liability insurance.
- IRMI. practice insurance policy.
- IRMI. architects and engineers liability coverage.
- IRMI. Controlled insurance program.