What this button does
Get the right coverage answer the first time you search. Add Total CSR as a preferred source, and our expert-written coverage resources will show up higher in your search results.
Employee training ROI in an insurance agency is the net dollar benefit of training divided by what the training cost, times 100. On the cost side, add course or platform fees, the hours staff spends off the phones at their loaded hourly cost, and the manager time spent coaching. On the benefit side, assign conservative dollar values to faster ramp-up, fewer errors, less manager time spent answering repeat questions, retained accounts, and avoided turnover. The cost of untrained employees is the mirror image: every one of those benefits is a cost you are already paying when a CSR learns by trial and error.
This article walks through each input in agency terms, then shows a fully worked, clearly hypothetical example you can redo on paper or in a spreadsheet with your own numbers.
Learning and Development ROI: What Untrained Staff Cost Your Agency
Most agencies never put a number on the cost of an untrained CSR or account manager because the cost is spread thin. It shows up as a few extra minutes per call, a reworked change request, or a question that pulls a senior person off a renewal. Over a year, those small costs usually become the biggest part of the business case for training.
Here is where untrained staff cost an agency money, grouped into three kinds of costs you can measure.
Time costs. A CSR who is unsure of a coverage or a carrier process takes longer on each request and is more likely to redo work after a manager reviews it. Until a new hire can work a full desk alone, you pay a full salary for partial output while someone else covers the gap. Every repeat question an owner or service manager answers is time not spent on sales, carrier relationships, or the agency's own book.
Error costs. Mistakes on endorsements, certificates, cancellations and renewals cost staff time to fix and can irritate clients and carriers. Missed coverage questions, unclear advice, and poor file documentation also create errors and omissions (E&O) exposure, even when no claim is ever filed.
Revenue and people costs. Staff who don't understand a client's exposures miss chances to cross-sell and have a harder time keeping accounts at renewal. People who feel unprepared also tend to leave, and replacing them restarts the whole ramp-up cycle.
Turnover deserves special attention because it can be the most expensive line. Gallup estimates that replacing an employee can cost one-half to two times their annual salary, and calls that range conservative. Our post on insurance industry turnover statistics covers the agency side of that picture, and we discuss the reasons why insurance CSRs quit. The point of listing these costs is not to scare anyone. It is to give you a checklist of benefit lines for the calculator. Each one becomes a row in the worksheet, valued in dollars with an assumption you can defend.
LMS ROI and the Cost of Training
The cost side of the formula is easier to measure than the benefit side, so it should be complete. Leaving out staff time makes almost any program look like a bargain, and an inflated result will not survive a skeptical partner meeting. Total training program costs for an agency usually include four groups.
Course or platform fees. These include invoices for course tuition, an annual subscription to a learning management system (LMS), or a per-seat platform price. If you use Total CSR, pricing is based on team size, and every plan gets the full platform, including training content, onboarding tools, assessments, compliance education, continuing education, and reporting. That makes this line a single known number for the year.
Staff time off the phones. This is often the highest hidden cost. Multiply the hours each person spends in training by their loaded hourly cost, meaning wages plus benefits and payroll costs. Benefits are not a rounding error: the Bureau of Labor Statistics reports that benefits made up 30.0% of private industry employer compensation costs in June 2026. A CSR paid $25 an hour therefore costs the agency noticeably more than $25 for each hour away from the desk.
Manager or trainer time. Count the hours a service manager, senior account manager, or owner spends building materials, sitting with new hires, reviewing their work, and answering questions, again at a loaded hourly rate, plus licensing and continuing education, where relevant. If the training includes license preparation fees or continuing education (CE) hours that you pay for, include them. If you would pay for CE anyway to keep licenses active, leave it out of the training cost so you do not double count.
A self-paced online platform changes the shape of these costs more than the total. Staff can train in shorter blocks between calls, spreading time off the phones across weeks instead of losing a full week. Our guide to choosing an insurance LMS covers the features that affect how much staff and manager time a platform actually saves.
Measuring ROI on Employee Training: A Worked Calculator
The formula has three steps. First, add up the dollar benefits. Second, subtract the costs to get net benefits. Third, divide net benefits by costs and multiply by 100 to get the ROI percentage. A related number, the benefit-cost ratio (BCR), is total benefits divided by costs. A BCR of 2.0 means every dollar spent came back twice.
Hypothetical example. A 10-person independent agency hires two new personal lines CSRs and puts both through a structured training program in their first months. Every number below is an assumption made up for illustration. Replace each one with your own figures before you use the result.
| Input (hypothetical) | Assumed value |
|---|---|
| Course or platform fees for the year | $3,000 |
| Training hours per new CSR | 60 |
| New CSR loaded hourly cost ($25 wage plus benefits) | $36 |
| Manager coaching hours per new CSR | 20 |
| Manager loaded hourly cost | $60 |
| Weeks of faster ramp-up per CSR | 4 |
| Productivity during ramp-up | 50% |
| Fewer errors per month (both CSRs) | 3 |
| Average cost to fix one error | $75 |
| Manager hours saved per week on repeat questions | 2 |
| Working weeks per year | 48 |
| New CSR annual salary | $52,000 |
| Replacement cost (half of salary) | $26,000 |
| Lower chance of losing one new CSR in year one | 20 percentage points |
| Commission on accounts kept by better service | $1,000 |
Costs. Fees are $3,000. Staff time is 2 CSRs times 60 hours times $36, or $4,320. Manager time is 2 times 20 hours times $60, or $2,400. Total cost is $9,720.
Benefit 1, faster ramp-up: each CSR reaches full productivity 4 weeks sooner. During ramp-up, they work at half speed, so each week gained is worth 40 hours times 50% times $36, or $720. Four weeks for two people is $5,760. Benefit 2, fewer errors: three fewer errors a month at $75 each, over 12 months, is $2,700. The $75 assumes about an hour of CSR time to fix the error plus a short manager review. It does not include any E&O claim, which keeps the number conservative.
Benefit 3, manager time: two hours a week saved at $60 for 48 weeks is $5,760. This is time the manager can put back into sales, renewals, or account reviews. Benefit 4, avoided turnover: using the low end of Gallup's range, replacing a $52,000 CSR costs about $26,000. If training lowers the chance of losing one of the two new hires by 20 percentage points, the expected saving is 20% of $26,000, or $5,200. Benefit 5, retained accounts: better service keeps a few accounts that might have left, worth an assumed $1,000 in commission.
Result. Total benefits are $20,420. Net benefits are $20,420 minus $9,720, or $10,700. ROI is $10,700 divided by $9,720, times 100, or about 110%. The BCR is about 2.1. Now isolate the effect of training. Not all of that improvement comes from training. A good manager, a simpler book, or a quiet season would also help. Suppose you judge that 60% of the gains came from training. Credited benefits drop to $12,252, net benefits fall to $2,532, and ROI becomes about 26%. Present that smaller figure, because it is the one a skeptical partner will accept.
You can turn this worked example into a simple training ROI calculator in any spreadsheet. Put each input in its own cell, build the cost and benefit lines as formulas, and add one cell for the share of gains you credit to training. Changing an assumption then updates the answer instantly.
The Phillips ROI Methodology and the KPIs to Track
A widely used structure for calculating training ROI comes from Jack and Patti Phillips. The ROI Institute describes five levels of evaluation, from reaction to return on investment, with ROI calculated as net program benefits divided by program costs. In plain words, the levels ask five questions:
- Reaction. Did staff find the training relevant and plan to use it?
- Learning. Did they learn it, as shown by a quiz, assessment, or test scenario?
- Application. Are they using it on the job, for example, handling endorsements correctly without help?
- Business impact. Did agency numbers move: faster turnaround, fewer errors, better retention?
- ROI. After converting the impact to money and subtracting costs, what was the return?
The same framework includes isolating the program's effects, as shown above, by crediting only the gains attributable to training. It also treats intangible benefits as part of the result. For an agency, those include better morale, more confident client conversations, and a stronger E&O posture. Report them in words when they are real but hard to price, rather than forcing a dollar figure onto them.
KPIs to record before and after training. The calculator only works if you have a baseline. Pick a few measures and record them for at least a month before training starts:
- Time to proficiency: weeks until a new hire works a full desk alone.
- Service requests handled: requests closed per person per week.
- Error or rework rate: reissued endorsements and wrong certificates of insurance.
- Client retention: account retention for the books each person services.
- E&O near misses: coverage gaps caught in file review.
- Staff turnover: first-year departures, which drive replacement cost.
Requests closed per week show any productivity improvement directly, and first-year departures tie straight to employee retention rates. Our new hire onboarding checklist can serve as your written definition of proficient, so time to proficiency is measured the same way for every hire. Our article on insurance agency KPIs lists more measures if you already track a scorecard and want to connect training to it.
Honest limits. Any return on training investment is an estimate, not an audited number. Benefits are often counted over a year while costs land up front, so short time frames understate the return. Some gains, such as an E&O claim that never happened, cannot be proven at all. To keep the estimate credible, use conservative inputs, show every assumption, isolate training's share, and repeat the calculation after the next cohort with real data instead of guesses.
Your next step. Pick one role, usually new CSRs or account managers, and record three baseline KPIs this month. Write down your costs for the next training cycle using the four cost groups above. After 90 days, fill in the worksheet with actual numbers. Pair the results with your employee retention strategies so the turnover line reflects what you are really doing to keep people.
Frequently Asked Questions
How do you calculate employee training ROI?
Subtract total training costs from the dollar value of training benefits, divide the result by the costs, and multiply by 100. Costs include fees, staff time at loaded hourly cost, and manager time. Benefits include faster ramp-up, fewer errors, saved manager time, retained accounts, and avoided turnover. Credit only the share of the improvement you can reasonably attribute to training, and show every assumption.
What is a good ROI for training in an insurance agency?
There is no single standard figure, so the useful test is whether the return is positive using conservative inputs. Any ROI above 0% means benefits exceeded costs. A result that only works with optimistic assumptions should be treated with caution. Compare each cohort against your own earlier results rather than a benchmark from another industry, because agency roles, books, and carriers differ.
How long does it take to see a return on training?
Most agency benefits appear over months, not weeks. Ramp-up gains show up once a new hire would otherwise still be learning a desk, while error and retention gains build over a renewal cycle. Measure at about 90 days for early signals, then again at 12 months for the full ROI of employee training, since costs land up front and benefits arrive later.
What costs do agencies most often leave out of the calculation?
Staff time is a line that is often left out. Hours spent in training are hours not spent on service, so they belong in the cost at a loaded hourly rate that includes benefits. Manager coaching time is another common gap. Leaving either out inflates ROI and makes the result harder to defend when partners or owners review it.
Does training ROI apply to experienced staff as well as new hires?
Yes, the same formula works for experienced CSRs, producers, and account managers. The benefit lines shift: instead of ramp-up, you value fewer complex errors, stronger cross-selling, better coverage conversations, and keeping skilled people who might otherwise leave. Advanced coursework and workforce development programs for veteran staff often pay back through retention and E&O prevention rather than speed.

