What this button does
Get the right coverage answer the first time you search. Add Total CSR as a preferred source, and our expert-written coverage resources will show up higher in your search results.
The CG 00 01 is the Insurance Services Office (ISO) commercial general liability coverage form written on an occurrence basis. It covers bodily injury and property damage that happens during the policy period, plus personal and advertising injury offenses committed during that period, even when the claim arrives years later. ISO has revised the form several times since its first edition in 1985, and the edition attached to a policy can change how a claim is handled.
For agency staff, that history is practical, not academic. The edition printed on a policy's forms schedule tells you which exclusions, definitions, and conditions apply. When a contract asks for coverage on current ISO wording, or a claim lands on an older policy, knowing what changed between editions helps you read the policy correctly and ask the right questions before coverage is bound.
Carriers can use their own forms or attach state amendatory endorsements that change the standard wording. Treat everything below as a guide to ISO's standard language, and confirm the actual wording in the policy you are reviewing before you answer coverage.
What the CG 00 01 Is and Why the Edition Date Matters
ISO's form numbers have two parts. "CG 00 01" identifies the form itself: CG is the commercial general liability line, and 00 01 is the occurrence version. The four digits that follow are the edition date in month and year order, so CG 00 01 04 13 is the April 2013 edition, and a form ending in 07 98 is the July 1998 edition.
Two parts of a form number
CG 00 01 (the form) + 04 13 (the edition date)
That edition date is easy to skip when you read a declarations page, but it matters. Two policies can both list the CG 00 01 and still treat the same loss differently, because one carries the 1998 wording and the other carries the 2013 wording. Endorsements carry their own edition dates too, and an endorsement written for one edition of the base form may not fit cleanly with another.
The companion claims-made form is the CG 00 02. It uses the same basic coverage parts but triggers coverage when a claim is first made, subject to a cutoff for earlier injury and to reporting rules. Most general liability placements in the standard market use the occurrence form, so the CG 00 01 is the version most CSRs and account managers review day to day.
Agencies also see carrier-specific forms that borrow ISO's structure but change some of the wording. A carrier form might mirror an ISO edition in most places and differ in one key exclusion. When the forms schedule lists a carrier form number instead of an ISO number, read it against the ISO edition it most closely follows rather than assuming the two match.
How the CG 00 01 CGL Form Is Built
The ISO CG 00 01 is organized into five sections. Knowing where each provision sits makes it much easier to compare one edition with another, because ISO usually changes specific paragraphs rather than rewriting the whole form.
- Section I, Coverages: Coverage A (bodily injury and property damage liability), Coverage B (personal and advertising injury liability), Coverage C (medical payments), and Supplementary Payments for Coverages A and B.
- Section II, Who Is An Insured: the named insured, plus its executive officers and directors, employees, volunteer workers, real estate managers, and certain others, depending on the type of organization.
- Section III, Limits of Insurance: the general aggregate limit, the products-completed operations aggregate, the personal and advertising injury limit, the each occurrence limit, the damage to premises rented to you limit and the medical expense limit.
- Section IV, Commercial General Liability Conditions: duties after an occurrence, claim or suit, legal action against the insurer, other insurance, premium audit, separation of insureds and transfer of rights of recovery.
- Section V, Definitions: the terms shown in quotation marks throughout the form, such as "occurrence," "insured contract," "your product," and "your work," which control what the coverage parts mean.
Coverage A is the core of the form. Its insuring agreement promises to pay sums the insured becomes legally obligated to pay as damages because of bodily injury or property damage caused by an occurrence. It also gives the insurer the right and duty to defend any suit seeking those damages. For bodily injury liability and property damage liability claims, the injury or damage must occur during the policy period and within the coverage territory.
Exclusions then narrow the broad coverage grants in Coverage A. They include the expected or intended injury exclusion, contractual liability, liquor liability, workers' compensation, the employers liability exclusion, pollution, aircraft, auto and watercraft, mobile equipment in certain uses, and war. Several exclusions address property: damage to property, damage to your product, damage to your work, damage to impaired property, and product recall.
The your work exclusion has a subcontractor exception that matters to contractors. The exclusion does not apply when the damaged work, or the work out of which the damage arises, was performed on the insured's behalf by a subcontractor. That exception has been part of the form since the 1980s and is one reason the form is so widely used for construction risks.
Some exclusions push a risk to another policy. The liquor liability exclusion applies to insureds in the business of manufacturing, distributing, selling, serving, or furnishing alcohol, so bars and restaurants need separate liquor coverage. The auto liability exclusion sends most vehicle claims to the commercial auto policy, while equipment that qualifies as mobile equipment generally stays with the general liability policy.
Coverage B, personal and advertising injury liability, works differently. Instead of an occurrence trigger, it responds to listed offenses committed during the policy period. These include false arrest, malicious prosecution, wrongful eviction or wrongful entry, and publication of material that slanders or libels a person or disparages an organization's goods, products, or services. They also include publication that invades privacy, use of another's advertising idea, and copyright infringement in the insured's advertisement, along with trade dress or slogan infringement.
Coverage C, medical payments coverage, pays reasonable medical expenses for bodily injury caused by an accident on the insured's premises or because of the insured's operations, regardless of fault. The expenses must be incurred and reported within one year of the accident, and the medical expense limit on the declarations caps what the insurer pays for each person.
Supplementary payments sit on top of the limits. Under the standard form, defense costs and the other amounts listed in that section for a suit the insurer defends do not reduce the limits of insurance. That feature has stayed in place across editions, and it is one reason a general liability policy differs from many professional liability policies, where defense often erodes the limit.
Section II decides who is insured, and the answer depends on the type of organization shown on the declarations. Independent contractors that the named insured hires are not insureds under the standard wording, which is why contracts so often require them to carry their own coverage and to add the hiring party by endorsement.
Most coverage conditions have changed little between editions. The insurer controls settlement procedures under the insuring agreement, which lets it investigate and settle any claim or suit at its discretion. The insured, in turn, must promptly notify the insurer of an occurrence, send copies of suit papers, and cooperate with the investigation.
CG 00 01 Editions From 1985 to 2013
Before the CG 00 01 existed, most businesses bought liability coverage under the comprehensive general liability policy, last revised in 1973. ISO replaced it with a simplified commercial general liability program. The first CG 00 01 edition is dated 11 85 (November 1985), and most states began using it in 1986.
The 1986 program changed several things at once. It introduced the general aggregate and a separate products-completed operations aggregate, and it moved personal and advertising injury coverage and medical payments into the base form. It adopted a much broader pollution exclusion than the 1973 policy had used, and it created the claims-made alternative, the CG 00 02.
The editions that followed are usually listed as 11 88, 10 90, 10 93, 01 96, 07 98, 10 01, 12 04, 12 07 and 04 13. Not every revision was major. Some editions mostly cleaned up wording or moved language from endorsements into the base form, while others changed how they handle real claims. The changes below are the ones most often cited for each edition, so check them against the actual form text before relying on them for a coverage position.
The late 1980s and early 1990s editions refined the 1986 language as the industry gained claims experience. The CG 00 01 10 93 edition is often cited for definition changes, including how leased workers and temporary workers are treated for coverage purposes. Agencies still see these older editions in long-tail injury claims, where the policy in force when the damage occurred may be decades old.
Around the late 1990s, ISO responded to the growth of the internet. The CG 00 01 07 98 edition combined the separate definitions of "personal injury" and "advertising injury" into a single personal and advertising injury definition. The 10 01 edition that followed added Coverage B exclusions for insureds in media and internet businesses and for material posted in electronic chatrooms or bulletin boards the insured hosts or controls.
The CG 00 01 10 01 edition is often described as one of the more significant rewrites. It stated that electronic data is not tangible property, so the loss of data alone is not property damage. It added known injury or damage language, which addresses injury the insured knew about before the policy period began, in response to court decisions that applied a continuous trigger to long-tail losses. It also revised the definition of mobile equipment so that vehicles subject to motor vehicle insurance laws are generally treated as autos.
The 12 07 edition moved into the form an exclusion, first issued by ISO as an endorsement in 2005, for distribution of material in violation of statutes such as the Telephone Consumer Protection Act and the CAN-SPAM Act, aimed at junk fax and unwanted email claims. It is also commonly cited for adding a separate electronic data exclusion to Coverage A. The 04 13 edition broadened the statutory exclusion to cover recording and distribution of material or information in violation of law, adding the Fair Credit Reporting Act and similar laws.
The ISO CG 00 01 04 13 edition came out with ISO's 2013 multistate general liability revision. Alongside clarifications in the base form, that revision updated many related endorsements. The additional insured (AI) endorsements are the best-known example. Their 04 13 versions limit AI coverage to what the written contract requires, cap the limits at the lesser of the contract requirement or the policy limits, and apply only to the extent permitted by law.
Since then, ISO has amended the 04 13 form through endorsements rather than a new base edition. In 2014, for example, it introduced data-related endorsements such as CG 21 06, which excludes damages arising out of access to or disclosure of confidential information and personal information. Some write-ups describe this exclusion as part of the 2013 form itself, but it attaches by endorsement, so check the form's schedule to see whether it applies.
Occurrence CG 00 01 vs Claims-Made CG 00 02
The edition history above applies to both forms, because ISO generally revises the occurrence and claims-made versions together. The key difference is the trigger, and that difference drives what happens when coverage ends.
CG 00 01 occurrence form
Responds to injury or damage that occurs during the policy period
An occurrence policy needs no tail, because the policy in force when the injury occurred responds whenever the claim is made.
CG 00 02 claims-made form
Responds to claims first made during the policy period
The claim must be for injury or damage after the retroactive date.
An insured on a claims-made basis needs extended reporting coverage, often called tail coverage, to report claims made after the policy ends for injury that happened while it was in force. The CG 00 02 includes a basic extended reporting period automatically and offers a supplemental option for an additional premium.
For a fuller side-by-side, see our comparison of occurrence and claims-made forms. In practice, the occurrence form is the norm for most commercial general liability placements, while the claims-made form shows up more often with hard-to-place or long-tail classes.
Reviewing CG 00 01 Editions on a Real Account
Knowing the edition history only helps if you check it on actual policies. These steps fit most commercial lines reviews, whether you are servicing a renewal, answering a certificate request, or helping with a claim.
- Record every edition date Read the forms schedule and write down the edition date of the CG 00 01 form and every endorsement attached to it, including state amendatory endorsements.
- Confirm it is an ISO form Confirm the form is an ISO form and not a carrier form with a similar number, because carrier wording can differ from ISO wording in important exclusions.
- Compare with the contract Compare the edition with any contract the insured has signed, especially requirements for AI status, primary and noncontributory wording, or waivers of recovery rights.
- Check endorsements that remove coverage Check the endorsements that remove coverage, such as a professional liability exclusion or a designated work exclusion, since they often change the base form more than an edition change does.
- For a claim, find the policy in force For a claim, identify which policy was in force when the injury or damage occurred, then read the edition attached to that policy rather than the current edition.
Contracts deserve special attention. Many construction contracts ask a subcontractor to add the owner or general contractor as an additional insured and to keep its own policy as primary insurance, with the other party's coverage as excess insurance. Whether the policy actually does that depends on the other insurance condition and on endorsements that change it, not on what the certificate says.
The contractual liability exclusion also deserves a look. It removes liability coverage the insured assumes in a contract, but it gives coverage back for an "insured contract," a defined term that includes many hold harmless agreements. Our glossary entry on the insured contract explains the definition in plain terms.
Completed operations exposure matters most to contractors. The products-completed operations hazard covers injury or damage that occurs away from the insured's premises after its work is finished, and it has its own aggregate limit. Our glossary entry on products and completed operations coverage covers the basics.
Waivers come up almost as often as AI requests. The base form's transfer of rights condition says the insured must do nothing after a loss to impair the insurer's recovery rights, but many contracts call for a specific endorsement. Our article on the waiver of subrogation endorsement CG 24 04 walks through how that endorsement works.
A Hypothetical CG 00 01 Edition Review
Here is an illustrative example, not a real account. A small electrical contractor signs a subcontract that requires AI coverage for ongoing operations and completed operations on CG 20 10 04 13 and CG 20 37 04 13 or their equivalent, with the contractor's policy primary.
The CSR pulls the forms schedule. It shows the 04 13 base form, a blanket AI endorsement in an older carrier edition, and nothing that extends AI coverage to completed work. The base form is current, but the endorsement does not match what the contract requires.
The next step is not to issue a certificate that says the requirement is met. The CSR flags the gap for the account manager, who asks the carrier whether it can add an endorsement covering the general contractor after the work is finished. The CSR also checks for a primary and noncontributory endorsement, then documents the request and the carrier's answer before sending any certificate.
The lesson is that a current base form does not guarantee current endorsements. Edition dates have to be checked one form at a time, against the exact wording the contract asks for. To see how one widely used AI form works, read our article on the uses of the CG 20 26 endorsement.
Frequently Asked Questions
What is the difference between the CG 00 01 and the CG 00 02?
The CG 00 01 is ISO's occurrence form, and the CG 00 02 is the claims-made commercial general liability coverage form. Both use similar coverage parts and exclusions, but the occurrence form responds to injury or damage during the policy period, while the claims-made form responds to claims first made during the policy period, for injury or damage that happened after the retroactive date.
What is the current edition of the CG 00 01?
The 04 13 edition is the base edition most agencies see on current ISO-based policies, often amended by later ISO endorsements such as the 2014 data-related exclusions. Carriers adopt editions on their own schedules and state rules vary, so always confirm the edition date on the policy's forms schedule rather than assuming.
How often does ISO revise the CGL form?
There is no fixed schedule. Between the 1985 and 2007 editions, ISO revised the form roughly every two to three years. The gap before the 04 13 edition was longer, and since then ISO has relied more on endorsements. Revisions usually follow court decisions, new types of claims, and regulatory changes.
Does an older edition always give less coverage than the 04 13 edition?
Not always. Newer editions often add exclusions, such as those for electronic data and statutory violations, so that an older edition can be broader on a specific issue. Other changes clarified wording or closed gaps. The only reliable answer comes from comparing the exact wording of both editions against the facts of the claim.
Which businesses usually buy the occurrence form?
Most businesses that buy general liability insurance in the standard market, from retailers to manufacturers to contractors, are written on the occurrence form. The claims-made form appears more often in hard-to-place or long-tail classes where an insurer wants to limit its exposure, so agency staff should explain tail needs to those insureds before binding.



